ATYPICAL BELT PRESSES

Description

Atypical belt presses are usually produced according to direct requirements of the customer who needs to separate in his technological process from each other liquid and solid components.
The presses are usually designed direct according to customer’s requirements and according to character of the pressed medium.
The devices are made from stainless steel.

WASHING PRESSES FOR THE PAPER INDUSTRY VX - P
Washing presses are used for washing process of „semi-matter“ in the paper industry.
The pressing process carried out in the presses placed one after the other and the repeated thinning remove step by step chemicals from the wood pulp.
Linen „semi-matter“ in the concrete technological line of the paper-mill OP papírna Olšany moves in succesive steps through four presses.
After passage through the first presses the pressed material falls into the water tank that also contains bleaching components.
The wood pulp is in the tank destructed using a mixer equipped with special rotating screw.
After homogenization and repeated thinning with water in the tank this material is pumped into the next press and the process starts again.
Via succesive pressing and repeated thinning the desired washing quality of the linen „semi-matter“ is reached.
Mentioned presses have to resist not only the corrosive character of water but also the chemicals, that is why they are produced form stainless steel.


BELT PRESS FOR PHARMACEUTICAL PURPOSE VX - B
Specially designed press for pressing of herbal and liquid mixtures (spirit, water, ...).  The final product is filtrate used for further processing in cosmetics, pharmaceutical industry etc.
These presses require higher quality of used material (stainless steel, plastics, ...) and resistance towards higher temperatures.
To increase the process effectiveness the press has the built in high – pressure sector. The operation of this sector can be regulated from the control panel of the press.

Parameters

Fotogaléria